Preliminary Controls - Swm Sm 125 R 2016 Kurzanleitung

PRELIMINARY CONTROLS

A. Engine-transmission oil level
Keeping the motorbike level and upright, check the
oil level through the inspection (1) window on the
right crankcase. Check that the level is in the mid-
dle of the sightglass "A" between the MIN and MAX
notch.
To fill up, remove the filler cap (2).
2
1
EN - 6
Quick RS-SM_125_MY16_ed00_11-2016_CodA000P01895.indd 6
B. Fuel level
Check the level in the tank, top up as needed.
C. Coolant level
Check level (1) in right-hand radiator when engine
is cold (place the motorbike fully upright). The cool-
ant must be 10mm above the parts and the level
may not be more than 2-3cm from the bottom of
the recovery reservoir (2) located in front of the rear
shock absorber. The radiator cap (3) is provided with
MAX
two locking positions: the first one is for prior dis-
charge of pressure in the cooling system.
„A"
WARNING:
Avoid removing radiator cap when engine
MIN
is hot, as coolant may spout out and cause
scalding.
1
2
3
15/12/16 12:40