SETTINGS (2 channel operation)
PHOTOME.VERS. (Photometer version)
SW-LOADABLE (EEPROM type - yes, no)
CONTACT (Responsible customer service branch)
BACKLIGHT (Display lighting)
MODBUS (Option) --> Submenu for setting of the BUS-relevant para-
meters
While you make changes in the SIGNALS menu, the normal measuring
operation of the device continues and all output signals are updated.
SIGNALS
PROCESS (Current work process)
ACTION (Subprocess)
INDEX (Process step)
STATUS (Function state – ok, error)
T (Temperature inside the housing)
REF (Current reference level)
MES (Current measurement level)
GAIN (Amplification of the reference- and measurement level [each 0–7])
ΔE-ACT (Current extinction)
ΔE-MEAS (Extinction of the last measurement)
ADDRESS (Adjustable slave address range of this
MODBUS participant
-->1–247)
SPEED (Transfer rate in baud
--> 4800, 9600, 19,200, 38,400, 57,600, 115,200)
NAME (Display of the name that was assigned via the bus to this
participant)
BUS-TEST (Reception test of the MODBUS protocol)
After 10 minutes without key actuation, the display jumps back to the
normal measurement operation display.
English 113