Electrical Connections - HACH LANGE AMTAX inter2 Bedienungsanleitung

Figure 4 Hose connections
SEDITAX 2 FILTRAX - 1
Hose connections with Hose connections with
SEDITAX 2
One-channel operation
1 Drain 1 Sample feed
2 Sample feed via 2 Sample overflow
Teflon sample pipe
3 Drain
from
SEDITAX 2
English 100
FILTRAX - 2
Hose connections with
FILTRAX FILTRAX
Two-channel operation
1 Sample feed 1
2 Sample overflow 1
3 Drain
4 Sample feed 2
5 Sample overflow 2

Electrical connections

N O T I C E
Only shielded lines may be connected!
Change of the fuse
D A N G E R
Some circuits in this device are protected by fuses against overvoltages. For
constant protection against risk of fire, replace these fuses only with fuses of the
same type and power rating.
D A N G E R
Defective fuses generally indicate a problem in the device. If fuse errors
repeatedly occur, contact the service department for instructions on the return
procedure for repair purposes. Under no circumstances attempt to repair the
device independently.
N O T I C E
On removal of the power plug (fixed installation of mains supply lead), a suitable
bipolar circuit breaker must be installed!
N O T I C E
Pull out the power plug before opening the device.
N O T I C E
All connected signal connection lines must be shielded