Prerequisite Information - SOMFY ilmo 50 WT Anleitung

These instructions apply to all ilmo 50 WT drives across all torque/speed ranges.

1. Prerequisite information

1. 1. Area of application
1. 2. Liability
2. Installation
2. 1. Installation
2. 2. Wiring
2. 3. Commissioning
2. 4. Tips and recommendations for installation
The ilmo 50 WT is a non-adjustable motor: a simple connection is all that is required.
The ilmo 50 WT programs its end limits automatically.
The ilmo 50 WT can be mounted either on the right or the left. It can be controlled from a control point
ZLWK D ¿[HG SRVLWLRQ RU PRPHQWDU\ DFWLRQW\SH VZLWFK
The ilmo 50 WT is equipped with:
obstacle protection to protect the roller shutter when it is being lowered.
-
anti-freeze protection to protect the roller shutter when it is being raised.
-
1. PREREQUISITE INFORMATION
1. 1. AREA OF APPLICATION
The ilmo 50 drive is designed to drive all types of roller shutters equipped with rigid links and stops,
ZKLFK IXO¿O DW OHDVW RQH RI WKH IROORZLQJ FRQGLWLRQV
The motorised product is controlled by a switch without a locking device (see the attached
-
Safety instructions document).
When deployed, all parts of the motorised product are more than 2.50 m above ground or
-
any other permanent access level.
The apron of the roller shutter can be raised by 4 cm if a force of 150 N is applied upwards
-
RQ WKH ¿QDO VODW SODFHG  FP IURP LWV IXOO\GHSOR\HG SRVLWLRQ
If the roller shutter has slats which can open, the openings must not allow a pin of diameter 5 mm
to pass through.
1. 2. LIABILITY
Please read these instructions carefully before installing and using the ilmo 40 drive. In addition
to following the instructions given in this guide, the instructions detailed in the attached Safety
instructions document must also be observed.
The ilmo 50 WT drive must be installed by a motorisation and home automation
professional, according to instructions from Somfy and the regulations applicable in
the country in which it is commissioned.
,W LV SURKLELWHG WR XVH WKH LOPR  :7 GULYH RXWVLGH WKH ¿HOG RI DSSOLFDWLRQ GHVFULEHG DERYH 6XFK
use, and any failure to comply with the instructions given in this guide and in the attached
instructions
document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the ilmo 50 WT
drive and must provide them with the instructions for use and maintenance, and the attached
instructions
document, after installing the ilmo 50 WT drive. Any After-Sales Service operation on
the ilmo 50 WT drive must be performed by a motorisation and home automation professional.
If in doubt when installing the ilmo 50 WT drive, or to obtain additional information, contact a Somfy
adviser or go to the website www.somfy.com.
Safety warning!
Copyright © 2007 - 2014 Somfy SAS. All rights reserved.
ORIGINAL GUIDE
CONTENTS
1 3. Use and maintenance
1 3. 1. Raising and lowering the roller shutter
1 3. 2. Obstacle detection
3. 3. Anti-freeze protection
2
2
4. Tips and recommendations for use
3
5. Technical data
4
4
1
Caution!
Images not contractually binding
6
6
6
6
6
6
Safety
Safety
Information
1