Prior Information; Fields Of Application; Liability - SOMFY S&SO-RS100 io HYBRID Anleitung

EN
The S&SO-RS100 io HYBRID is a new generation drive designed to offer improved
convenience and safety for users and greater simplicity for installers when setting up due
to optimal adaptability of the drive to roller shutters (default Plug&Play drive, for which
settings may be adapted depending on the equipment level of the roller shutter).
This "hybrid" drive enables control via a wired control point as well as via io-homecontrol
control points or sensors in the same installation, making it the perfect solution for
new build homes. It offers innovative functions thanks to the new SMS technology
(Smart Motion System) accessible via the io-homecontrol
These functions are also accessible via the Smoove RS100 io control point developed
exclusively for drives using SMS technology.

1. PRIOR INFORMATION

1.1. FIELDS OF APPLICATION

The S&SO-RS100 drive is designed to motorise all types of roller shutters complying with
at least one of the following conditions:
- The roller shutter apron can be lifted by 4 cm when an upward force of 150 N is applied
to the end slat positioned at 16 cm from its totally extended position.
- The roller shutter is controlled by a control point without locking, installed within sight of
the closing but away from moving parts and at a height of at least 1.50 m.
- The end closure zone is located at a height in excess of 2.50 m from the ground or any
permanent access level.
If the roller shutter is equiped with openwork slats, a 5 mm diameter rod must not pass
through the openings.

1.2. LIABILITY

Before installing and using the S&SO-RS100 io HYBRID drive, please read these
instructions carefully. In addition to the instructions provided in this guide, please also
comply with the instructions set out in the enclosed document Safety instructions.
The S&SO-RS100 io HYBRID drive must be installed by a home motorisation
and automation professional, in accordance with Somfy's instructions and the
applicable regulations in the country of installation.
$Q\ RSHUDWLRQ RI WKH 6 6256 LR +<%5,' GULYH RXWVLGH WKH ¿HOGV RI DSSOLFDWLRQ
described above is prohibited. Such operation shall exclude Somfy from all liability and
invalidate the Somfy warranty, as will any failure to comply with the instructions given
herein and in the enclosed Safety instructions document.
After installing the S&SO-RS100 io HYBRID drive, the installer must inform his customers
of the operating and maintenance conditions for the S&SO-RS100 io HYBRID drive and
must pass the operating and maintenance conditions on to them, as well as the enclosed
Safety instructions document. Any After-Sales Service operation on the S&SO-RS100 io
HYBRID drive requires intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the S&SO-RS100 io HYBRID drive or for
additional information, consult a Somfy contact or visit www.somfy.com.
2
Copyright © 2014 - 2015 Somfy SAS. All rights reserved.
®
installation tool Set&Go io.
Non contractual images.
®