Sonoro QUBO SO-220 Bedienungsanleitung Seite 80

1. Press the [SETUP] button in DAB playback mode
W The display shows the [DAB Full Scan] text. (Fig. 39).
2. Press the click wheel on the device or the [OK] button on the remote control to
activate.
W The device will search for available radio stations and play back the first
available station.
Manual tuning
Prerequisite:
• The antenna is connected.
Fig, 40: Manually finding DAB stations
1. Press the [SETUP] button in DAB playback mode.
2. Press the [Next] button.
W The display shows the [DAB Manual Tune] text. (Fig. 40).
3. Press the click wheel on the device or the [OK] button on the remote control.
4. Press the [Next] or [Previous] button, or turn the click wheel to scroll through the
individual stations.
5. Press the click wheel to confirm your selection.
Removing inactive stations – Prune list
If the DAB station list created using the DAB full scan function is out of date (e.g. after
a change of address), you can remove inactive stations automatically.
Fig, 41: Deleting inactive DAB stations
1. Press the [SETUP] button in DAB playback mode.
W The display shows the [DAB Full Scan] text.
2. Turn the click wheel until the display shows [Prune list] (Fig. 41)
80
© sonoro audio GmbH 2018