Sonoro QUBO SO-220 Bedienungsanleitung Seite 67

• Setting display dimmer.
• Setting alarm light (only with sonoroLIGHT).
• Set the automatic time/date update function.
• Set the display language.
• Activate/deactivate Demo Sound.
Reset the device to the factory settings. To adjust the settings, proceed as follows:
1. Press the [SETUP] button on the front of the device or the remote control to enter
the corresponding submenu.
2. Press the [Next] or [Previous] button or turn the click wheel to scroll through the
individual menu items.
3. To open the selected menu item, briefly press the click wheel or the [OK] button on
the remote control.
4. To exit the menu, briefly press the [SETUP] button on the device or on the remote
control.
If you do not make any further entries, the menu will close and the display switches
to the initial mode.
Setting the time format
Fig, 13: Setting the time format
You can choose between the 24-hour and 12-hour formats. In the 12-hour format, the
time of day is indicated by [AM] and [PM].
Setting the date format
Fig, 14: Setting the date format
© sonoro audio GmbH 2018
GB
67