Switching The Alarm Clock On/Off; Switching Off The Alarm Clock After The Alrm Sounds - Sonoro QUBO SO-220 Bedienungsanleitung

Example
Settings made:
• Alarm time: 07:00 a.m.
• Brightness: 15
• Timeframe: 30 min
At 06:30 a.m., the alarm light is switched on and the brightness is increased
gradually from level 0 to level 15 by 07:00 a.m.
8.6

Switching the alarm clock on/off

Switching on the alarm clock
1. To switch on the alarm clock, briefly press the [Alarm 1] or the [Alarm 2] button on
the front of the device or the remote control.
Switching off the alarm clock
2. To switch off the alarm clock, briefly press the [Alarm 1] or [Alarm 2] button again.
8.7 Switching off the alarm clock after the alarm sounds
1. To switch off the alarm, press one of the following buttons:
• [Alarm 1]
• [Alarm 2]
• Click wheel
• [Standby]
W The alarm will remain activated for the next day. This does not apply if the
non-recurring alarm setting is in use. The alarm light remains on and retains
its current brightness.
.
After 60 min, the alarm is switched off automatically.
2. Press the [Light] button to switch the alarm light off.
3. To switch the alarm clock off and have it come back on after a set period of time
(Snooze), press the [SNOOZE] button on the remote control.
Alternatively, you can turn the click wheel when the alarm sounds to set the snooze
time. Press the click wheel to confirm.
W The remaining snooze time is displayed. After the set time expires, the
alarm will sound again.
© sonoro audio GmbH 2018
GB
75