Connecting The Antenna; Preparing The Remote Control - Sonoro QUBO SO-220 Bedienungsanleitung

Fig, 8: Installing the universal adapter
1. Push the universal adapter onto the AC adapter until it clicks into place.
2. Insert the plug connector of the AC adapter into the 15.5 V, 2.9 A DC port at the
back of the device.
3. Insert the mains plug into the socket..
6.4

Connecting the antenna

1. Screw the rod antenna located on the back of QUBO to the FM/DAB antenna
socket.
2. If you are using the rod antenna, pull the arms of the rod antenna apart and align
the antenna so that you have the best possible reception.
For even better reception, attach the cable to a suitable house antenna.
6.5

Preparing the remote control

Fig, 9: Inserting the battery into the remote control
1. Open the battery compartment on the remote control with a small coin. (Fig. 10)
© sonoro audio GmbH 2018
GB
63