Setting The Alarm Source; Setting The Alarm Volume - Sonoro QUBO SO-220 Bedienungsanleitung

8.2

Setting the alarm source

After you have set and confirmed the alarm time, you can set the source for the alarm.
Fig, 27: Setting the alarm source
1. Turn the click wheel to select the medium you want to use: (Fig. 27)
FM Select an FM station preset from the station
memory that you wish to start the device with
and wake up to.
DAB Select a DAB station preset from the station
memory that you wish to start the device with
and wake up to.
CD Select a track from the CD you wish to start the
device with and wake up to.
Relax Music Select a Relax Music track from the memory
you wish to start the device with and wake up
to.
Ringtone Select a ringtone from the memory that you
wish to start the device with and wake up to.
2. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm source is set.
8.3

Setting the alarm volume

After you have set and confirmed the alarm source, you can set the alarm volume.
Fig, 28: Setting the alarm volume
1. Turn the click wheel to set the desired volume. (Fig. 28)
2. Press the click wheel or the [OK] button on the remote control to confirm your
setting.
W The alarm volume is set.
© sonoro audio GmbH 2018
GB
73