Selecting A Playback Mode; Radio Playback - Sonoro QUBO SO-220 Bedienungsanleitung

Switching on the sound
2. To turn the sound back on, press the [MUTE] button on the device or the remote
control again.
W The initial screen is displayed.
9.3

Selecting a playback mode

Select the desired mode to playback audio from different media or external devices.
Fig, 34: Selecting a playback mode
1. Switch on the device.
2. Press the [MENU] button on the front of the device or the appropriate button on
the remote control.
W The display shows the selected mode. (Fig. 34).
Alternatively, you can also rotate the click wheel after pressing the [MENU] button to
toggle through the different modes. Confirm the mode by pressing the click wheel.

10. Radio playback

After you have selected radio playback from [FM] or [DAB] (digital radio), the display
shows the FM or DAB symbol, as well as the following information:
• Mode: FM or DAB.
• Stored programme channel, if the radio station is stored in the programme
memory.
• Station name, if the station transmits RDS information.
• RDS information from the station, if the station transmits RDS information.
RDS ("Radio Data System") is only available for stations in the FM frequency range
and only if the corresponding station transmits RDS data.
If the station does not broadcast RDS information, then the frequency is displayed
instead of the station name.
© sonoro audio GmbH 2018
GB
77