Cd Playback - Sonoro QUBO SO-220 Bedienungsanleitung

3 different settings are available:
• DRC HIGH: high degree of compression
• DRC LOW: low degree of compression
• DRC OFF: no compression
Prerequisite:
• The device is in DAB mode.
1. Press the [SETUP] button.
W The display shows the [DAB Full Scan] text.
Fig, 43: Setting the DRC
2. Press the [Next] button until the [DRC Setting] text is displayed.
3. Press the click wheel on the device or the [OK] button on the remote control.
4. Select the desired setting using the [Next] or [Previous] button.
5. Press the click wheel to confirm the setting.

11. CD playback

NOTICE!
Material damage from improper operation!
Do not insert any recording media that deviate from the standard CD format (e.g.
mini-discs, etc.) into the CD player. These may not be played and ejected correctly.
Insert only one disc at a time into the CD player.
1. Switch on the device.
2. Insert the CD into the CD slot with the label side up.
W The CD player will automatically pull in the CD and start playback.
If the device is in a different mode, it will automatically switch to CD mode.
In CD mode, the display shows the following information:
Fig, 44: Display in CD mode
82
© sonoro audio GmbH 2018