Sonoro QUBO SO-220 Bedienungsanleitung Seite 68

You can set three different date formats (Fig. 14/A, B and C) as well as the current day.
The configuration options are:
A: Current day, month, year.
•
B: Current month, day, year.
•
C: Current month (in words), day, year.
•
Setting display dimmer
Fig, 15: Setting display dimmer
Depending on the ambient brightness, the display is switched to bright or dark. The
ambient brightness is detected by a sensor beside the display.
You can set the desired brightness level.
• Display High: Level 08 to 15 (Fig. 16/A)
• Display Low: Level 01 to 08 (Fig. 16/B)
Setting alarm light
Fig, 16: Setting alarm light
In addition to the alarm, you can also be woken up in the mornings with a light that
gets gradually brighter (only in conjunction with sonoroLIGHT).
To this end, you can proceed as follows to set the desired brightness of the alarm
light and the time- frame in which the alarm light should reach this brightness:
• Brightness: 01 to 32 (Fig. 16/A)
• Alarm light: 0 to 60 min (Fig. 16/B)
Setting the automatic time/date update function
Fig, 17: Setting the automatic update function
68
© sonoro audio GmbH 2018