How To Set An Option - Electrolux GA60PLVC Benutzerinformation

Options
Hygiene
TimeManager
Settings

7.2 How to set an option

The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the
value from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
the number of hours available for the
delay start. Select the number of hours
and press again the OK key to confirm.
4. To go back to the programme list,
press repeatedly the Option key until
the display shows the selected
programme.
7.3 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than Eco 50°. It is
automatically activated in next cycles.
Values
ON
OFF (default value)
Fast
Normal (default value)
Enter appliance settings
Description
Ensures better hygiene re‐
sults by keeping the tem‐
perature at 70 °C for at
least 10 minutes during the
last rinsing phase.
Reduces the duration of a
selected programme by
approximately 50%. Refer
to specific information pro‐
vided in this chapter.
This configuration can be changed at any
time.
Every time Eco 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates
TimeManager and vice versa.
7.4 TimeManager
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as
with the normal programme duration but
the drying results can be less
satisfactory.
The TimeManager option is not
applicable to all programmes.
1. Scroll through the programme list
and select a programme.
2. Press the OK key to confirm.
If the TimeManager option is applicable
to the selected programme, the display
shows the 2 conditions Fast and Normal
and the programme duration for each
condition:
• Fast: TimeManager activated.
Press the OK key to confirm.
• Normal: TimeManager
deactivated. Press the OK key to
confirm.
ENGLISH 13