Hints And Tips - Electrolux GA60PLVC Benutzerinformation

18 www.electrolux.com
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the countdown.
Close the appliance door.
• Select Stop and press OK to
cancel the delay start.
Cancelling a running
programme
When you cancel the running
programme the options are set to their
default values.

10. HINTS AND TIPS

10.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, use the prewash
program (if available) or select a
program with a prewash phase.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the running
programme. Close the appliance
door.
• Select Stop and press OK to
cancel the running programme.
End of programme
When the programme is completed, the
TimeBeam displays 0:00 and CLEAN.
1. Press the on/off button or wait for the
Auto Off function to automatically
deactivate the appliance. If you open
the door before the activation of Auto
Off, the appliance is automatically
deactivated.
2. Close the water tap.
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
• Always use the whole space of the
baskets.
• When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
nozzles. Make sure that items do not
touch or cover each other.
• You can use dishwasher detergent
and rinse aid separately or you can
use the multi-tablets (e.g. ''3in1'',