How To Activate The Rinse Aid Dispenser; Technical Information; Environment Concerns - Electrolux Service 7000 Bedienungsanleitung

54
Refer to 'HINTS AND TIPS' for other
possible causes.
How to activate the rinse aid
dispenser
The activation of the rinse aid dispenser can
occur only with the multitab option activa-
ted.
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to 'Setting and
starting a programme'.
2. Press and hold buttons (8) and (9) at the
same time until the programme indica-
tors above buttons (8), (9) and (10) flash.
3. Press button (9) .

TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water
supply to decrease energy consumption.

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
4. Press button (9) to change the setting.
5. Deactivate the appliance to confirm the
6. Adjust the released quantity of rinse aid.
7. Fill the rinse aid dispenser.
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
Left-on mode
Off-mode
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
• Discard correctly the packaging material.
• The programme indicators above but-
tons (8) and (10) go off.
• The programme indicator above but-
ton (9) continues to flash.
• The display shows the current setting
of the rinse aid dispenser.
setting.
2)
Recycle the materials with the symbol
.
Off
On
546 / 759 / 570
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
12
0.10 W
0.10 W