Storch DriveFixx Bedienungsanleitung Seite 86

DRILL MODE (Fig. 9)
Select the drill mode for drilling and other heavy duty
applications.
To select the drill mode, rotate the torque-adjustment ring
until the icon aligns with the torque indicator and clicks
into position.
LED WORKLIGHT (Fig. 10)
The LED worklight underneath the chuck will illuminate
when the trigger switch is depressed. This provides additi-
onal lighting on the surface of the workpiece for operation
in lower light areas. The LED worklight will turn off when
the trigger switch is released.
INSTALLING BITS (Fig. 11)
Lock the trigger switch by placing the direction-of-rotation
selector in the OFF (center) position.
Open or close the chuck jaws to a point where the opening
is slightly larger than the bit size you intend to use.
Raise the front of the drill slightly to keep the bit from
falling out of the chuck jaws.
Insert a drill bit.
NOTE:
Rotate the chuck body in the direction of the arrow mar-
ked GRIP to close the chuck jaws. Do not use a key to
tighten or loosen the jaws.
Tighten the chuck jaws securely on the bit
Torque indicator
LED worklight
Variable-speed trigger
switch
Keyless chuck
Drill bit
Chuck jaws
GRIP
(tighten)
86
Drill icon
OPEN (release)