Herunterladen Inhalt Inhalt Diese Seite drucken

Storch DriveFixx Bedienungsanleitung Seite 77

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Under abusive conditions, liquid may be ejected from the battery;avoid contact . If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation
or burns.
SERVICE
The power tool should be repaired exclusively by a STORCH technician or by a co-operating STORCH service centre.
When servicing a power tool, use only identical replacement parts.
Observe the instructions specified under the "Maintenance" section of this manual. The use of non-approved parts or
non-compliance with the maintenance instructions can result in electric shock or potential injury.
SPECIFIC SAFETY RULES FOR CORDLESS DRILL
Hold the power tool by the insulated gripping surfaces if there is any risk of drilling into hidden electric cables during
use. If the power tool comes into contact with live cables, it can cause unprotected metal parts of the tool to become
energised and give the user an electric shock.
If possible, always use clamps or a vice to hold your work.
Always switch off before you put the drill down.
Ensure that the lighting is adequate.
Only exert enough pressure on the drill driver to prevent the motor from slowing. Doing this will protect the tool and
ensure optimum results are obtained.
Keep the area free of tripping hazards.
Only allow properly instructed and competent personnel to use the power tool.
Only use the drill if it is in perfect working order.
Before drilling make sure there is sufficient space for the drill underneath the workpiece.
Do not touch the drill after use. It heats up considerably.
Keep your hands away from under the workpiece.
Never use your hands to remove dust, chips or waste close by the bit.
Rags, cloths, cord, string and the like should never be left around the work area.
Support the work properly.
If you are interrupted when operating the drill, complete the process and switch off before looking up.
Periodically check that all nuts, bolts and other fixings are properly tightened.
77

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis