Personal Safety - Storch DriveFixx Bedienungsanleitung

PERSONAL SAFETY

When operating a power tool stay alert and concentrate on what you are doing. Do not use the tool if you are tired or
under the influence of drugs, alcohol, or medication. A lapse in concentration while operating a power tool may result
in serious personal injury.
Use personal protective equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent the tool from being started accidentally. Prior to connecting the battery pack and before lifting or carrying the
tool make sure that the switch is in the OFF position. Carrying tools with your finger on the ON/OFF switch, or plugging
in tools whose switch is set to the ON position, can result in an accident.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating
part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unex-
pected situations.
Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job bet-
ter and more safely at the rate for which it was designated.
Do not use the power tool if the switch does not turn it ON and OFF. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the battery pack before making any adjustments, changing accessories, or storing the power tool. This safe-
ty measure will prevent the tool from starting accidentally.
Keep any power tools that are not being used out of the reach of children. Do not allow any person who is unfamiliar
with the power tool or these instructions to operate the tool. Power tools are dangerous when placed in the hands of
inexperienced users.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that may affect the tools operation. If damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Use the power tool, accessories, tool bits etc. in accordance with these instructions , taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from intended could result in a
hazardous situation.
HANDLING AND USE OF CORDLESS TOOLS
Make sure that the switch is in the OFF position before insertingthe battery pack. Inserting the battery pack into power
tools that havethe switch ON invites accidents.
Recharge only with the charger specified by the manufacturer. Acharger that is suitable for one type of battery pack
may create a risk offire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of
injury and fire.
When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails
screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery ter-
minals together may cause burns or a fire.
76