Explanation Of The Safety Information On The Device; General Safety Information; Set-Up And Operation; Intended Use - CAT UNIDRIVE X1000 Bedienungsanleitung

3.2

Explanation of the Safety Information on the Device

CAUTION:
This symbol indicates to read the instruction manual carefully prior to operation of the
instrument. Please mark points which require special attention in your field of
application so they are not overlooked. Disregarding of warnings may result in
impairment of serviceability as well as impairment of the user.
3.3

General Safety Information

Attention:
Please comply with all safety and accident-prevention regulations applicable to
laboratory work .
Attention:
Do not use the unit with flammable or explosive substances. The instrument is not
explosion-proof.
Attention:
Only instructed users may operate the instrument.
Important Note:
Make sure that all safety information of the instrument respectively on the device
itself are clearly visible during operation
Attention:
If noise level exceeds 85 dB (A) at the work station operator must use ear plug and/or
ear mufflers.
Attention:
Do not open the instrument. Repairs are only to be carried out by trained service
technicians.
Ensure that the unit is firmly attached to a stand.
Wear ear protection should the noise level exceed 85 dB(A).
Wear eye protection.

4 Set-up and Operation

4.1

Intended Use

The UNIDRIVE X1000/X1000D is a homogenizing system which in connection with a homogenizing
tool produces emulsions and dispersions. For safe operation the unit has to be fixed to a stand.
Instruction Manual UNIDRIVE X1000/X1000D 2011/08 V3.00 Page/Seite 8 von/of 47