Set-Up; Assembly Of Support Rod - CAT UNIDRIVE X1000 Bedienungsanleitung

4.3

Set-up

4.3.1 Assembly of Support Rod

 Screw the support rod (8) into the threaded bore (7) at the back of the unit.
 Insert a screw driver into the bore at the end of the support rod (8) and firmly
tighten the support rod by turning the screw driver to the right.
Instruction Manual UNIDRIVE X1000/X1000D 2011/08 V3.00
threaded bore for
support rod (7)
support rod (8)
Page/Seite 10 von/of 47