Operation Unidrive X1000/X1000D; Connect The Unit To The Mains - CAT UNIDRIVE X1000 Bedienungsanleitung

4.5

Operation UNIDRIVE X1000/X1000D

Attention:
When connecting the instrument to an AC power outlet, ensure that your local supply
voltage matches that indicated on the instrument's rating plate.
power cord (1)

4.5.1 Connect the Unit to the Mains.

The drive unit is turned on and off by means of the on/off switch (3) at the front of the motor
housing.
Set the speed with the speed adjustment wheel (2).
Caution:
The on/off switch (3) is only single-pole and is thus not suitable for safely isolating
the unit from the mains supply!
Instruction Manual UNIDRIVE X1000/X1000D 2011/08 V3.00
speed adjustment wheel (2)
on/off switch (3)
ventilation slots (4)
speed display X1000D (5)
holding screw (6)
position I: motor runs
position 0: motor off
Page/Seite 13 von/of 47