General Information; Unpacking The Instrument; Scope Of Delivery; Homogenising Tools And Accessories (To Be Ordered Separately) - CAT UNIDRIVE X1000 Bedienungsanleitung

1 General Information

The CAT homogeniser Unidrive X1000/Unidrive X1000D is designed in accordance with Safety
Class 1 and built and tested in accordance with DIN EN 61010.
According to these regulations the unit is designed to meet the requirements for safe and correct
operations. To maintain the proper safety and operational functions of the instrument the user
should follow the instructions and safety guidelines in this manual.

2 Unpacking the Instrument

Unpack the instrument carefully and check to see that it is not damaged. It is important that any
damage incurred in transport to be recognized at the time of unpacking. Notify your carrier or
forwarding agent immediately in case of such damage.
2.1

Scope of Delivery

Please check that the package contains the following:
Type Description
X 1000 Homogenizing Drive Unit, 230V
X 1000 Homogenizing Drive Unit, 115V
X 1000D Homogenizing Drive Unit, 230V
X 1000D Homogenizing Drive Unit, 115V
1 Support Rod
1 Instruction Manual
2.2

Homogenising Tools and Accessories (to be ordered separately):

Tools Description
T 6 Shaft, 6 mm diameter, 55 mm long,
complete with generator
T 6 Shaft, 6 mm diameter, 120 mm long,
complete with generator
T 10 Shaft, 10 mm diameter complete with generator
T 17 Shaft, 10 mm diameter,
complete with 17 mm generator
T 20 Shaft, 20 mm diameter complete with generator
G 20 Shaft, 20 mm diameter complete with generator
T 30 Shaft, 20 mm diameter complete with 30 mm generator
G 30 Shaft, 20 mm diameter complete with 30 mm generator
DK 30 Flow-through chamber for shaft G20 or G30
AX60 Analytical mill
Instruction Manual UNIDRIVE X1000/X1000D 2011/08 V3.00
Part No.
60402-50 or
60402-51 or
60406-50 or
60406-51 or
Part No.
60420*
60410*
60421*
60426*
60422*
60423*
60424*
60425*
60428-00
60409-00
Page/Seite 5 von/of 47