Safety Information; Explanation Of The Safety Information In The Instruction Manual - CAT UNIDRIVE X1000 Bedienungsanleitung

Important Note:
Read this instruction manual carefully before operating the instrument. Should there
be any additional questions, after reading these instructions, concerning the set-up,
operation or warranty, please contact either your distributor, or the manufacturer at
the following address
Important Note:
Please store the instruction manual in a place easily accessible to every user.
Important Note:
Make sure that the unit is to be operated under the conditions corresponding to that
as described under the section titled "Technical Data"
A EURO AC plug (DIN 49441 CEE 7/VII10/ 16 A 250 V) is standard on all instruments.
For North America instruments feature standard US plugs (NEMA Pub.No.WDI1961
ASA C 73.1. 1961 page 8 15A 125V).
When operating the instruments in countries with different AC plug systems use an
approved adapter or have a qualified electrician replace the AC plug with an
approved model suitable fort the country of operation.
The instrument is earthed as supplied. When replacing the original AC plug, ensure
that the earth conductor is connected to the new plug!

3 Safety Information

3.1

Explanation of the Safety Information in the Instruction Manual

This symbol emphasizes the following notices, which have to be strictly observed by
the user! Disregarding of warnings may result in impairment of serviceability as well
as impairment of the user.
This symbol emphasizes prohibitions, which have to be strictly observed. Any
disregard of the prohibitions may result in severe impairment of serviceability as well
as severe impairment of the user.
This symbol emphasizes notices, which have to be observed by the user to assure a
safe operation of the unit.
CAUTION:
Hazard of fire or explosion!
Instruction Manual UNIDRIVE X1000/X1000D 2011/08 V3.00
Ingenieurbüro CAT
M. Zipperer GmbH
Etzenbach 16
D-79219 Staufen
+49-7636-7803-0
Page/Seite 7 von/of 47