Explanation Of The Safety Information On The Device; General Safety Information; Set-Up And Operation; Intended Use - CAT X120 Bedienungsanleitung

3.2

Explanation of the safety information on the device

CAUTION:
This symbol indicates to read the instruction manual carefully prior to operation of
the instrument. Please mark points which require special attention in your field of
application so they are not overlooked. Disregarding of warnings may result in
impairment of serviceability as well as impairment of the user.
3.3

General Safety Information

Attention:
Please comply with all safety and accident-prevention regulations applicable to
laboratory work.
Attention:
Do not use the unit with flammable or explosive substances. The instrument is
not explosion-proof.
Attention:
Only instructed users may operate the instrument.
Important Note:
Make sure that all safety information of the instrument respectively on the device
itself are clearly visible during operation
Attention:
If noise level exceeds 85 dB (A) at the work station operator must use ear plug
and/or ear mufflers.
Attention:
Do not open the instrument. Repairs are only to be carried out by trained service
technicians.
Ensure that the unit is firmly attached to a stand.

4 Set-up and Operation

4.1

Intended Use

The X120 is a homogenizing system which in connection with a homogenizing tool
produces emulsions and dispersions. Suitable homogenizing tools are shafts T6, T10 and
T17.
Bedienungsanleitung/Instruction Manual X120_2011/05 V1.04 Page/Seite 6 von/of 31