Safety Information; Explanation Of The Safety Information In The Instruction Manual - CAT X120 Bedienungsanleitung

Important Note:
Read this instruction manual carefully before operating the instrument.
Should there be any additional questions, after reading these instructions,
concerning the set-up, operation or warranty, please contact either your
distributor, or the manufacturer at the following address
Important Note:
Please store the instruction manual in a place easily accessible to every user.
Important Note:
Make sure that the unit is to be operated under the conditions corresponding
to that as described under the section titled "Technical Data"
A EURO AC plug (DIN 49441 CEE 7/VII10/ 16 A 250 V) is standard on all
instruments. For North America instruments feature standard US plugs
(NEMA Pub.No.WDI1961 ASA C 73.1. 1961 page 8 15A 125V).
When operating the instruments in countries with different AC plug systems
use an approved adapter or have a qualified electrician replace the AC plug
with an approved model suitable fort the country of operation.
The instrument is earthed as supplied. When replacing the original AC plug,
ensure that the earth conductor is connected to the new plug!

3 Safety Information

3.1

Explanation of the safety information in the instruction manual

This symbol emphasizes the following notices, which have to be strictly observed
by the user! Disregarding of warnings may result in impairment of serviceability
as well as impairment of the user.
This symbol emphasizes prohibitions, which have to be strictly observed. Any
disregard of the prohibitions may result in severe impairment of serviceability as
well as severe impairment of the user.
This symbol emphasizes notices, which have to be observed by the user to
assure a safe operation of the unit.
CAUTION:
Hazard of fire or explosion!
Bedienungsanleitung/Instruction Manual X120_2011/05 V1.04
Ingenieurbüro CAT
M. Zipperer GmbH
Etzenbach 16
D-79219 Staufen
+49-7636-7803-0
Page/Seite 5 von/of 31