Endress+Hauser RIA45 Kurze Bedienungsanleitung Seite 42

Operating elements and display
Expert menu
F
Direct access
O
System
Access code
Overfill protect
Reset
Save user setup
O
Input
The following parameters are available in addition to the parameters from the Setup menu:
Analog in 1 / 2
O
Output
The following parameters are available in addition to the parameters from the Setup menu:
Analog out 1 / 2
Relay 1 / 2
42
Bar 0%
Bar 100%
Decimal places
Damping
Failure mode
Fixed fail value
Namur NE43
Allow reset
Fail mode
Fixed fail value
Time delay
Operating mode
Failure mode
Description
Direct access to an operting function
System settings
Protection of operating menu by means of access code
Overfill protection
Device reset
Save settings made in the setup
Inputs
Analog input 1 / 2
Lower limit for bargraph of analog input
Upper limit for bargraph of analog input
Decimal place for analog input
Damping
Failure mode
Fixed value in the event of an error (only, if Failure mode =
Fixed value)
Error limits according Namur
Allow reset of min/max values via Display menu
Outputs
Analog output 1 / 2
Failure mode
Fixed value in the event of an error (only, if Fail mode =
Fixed value)
Relay 1/2
Switching delay time
Operating mode
Behavior in the event of an error
RIA45
Endress+Hauser