System Description; System Overview; Standard Equipment - Kärcher CB 1/23 Eco Bedienungsanleitung

1 Pillars 1
2 Pillars 2
3 Side brushes
4 Chassis
5 Wheel wash facility
6 Jets for shampoo, foam
7 Jets for brush watering, rinsing, drying
aid
8 Roof brush
9 Drier
10 Detergent canister
11 Dosing pumps
12 Dirt catcher
13 Drive-rails
14 Control cabinet
15 Nameplate
22

System description

System overview

Standard equipment

side brushes
The rotating side brushes clean the vehicle
from the side, in the front and rear areas.
roof brush
The rotating roof brush remove dirt from the
top part of the vehicle.
Wheel wash facility
The Comfort model of the vehicle washing
plant is equipped with two wheel wash facil-
ities for to provide a thorough rim flange
cleaning. The position of the wheels is de-
tected through a light barrier. The rotating
brushes are pressed by a pneumatic cylin-
der against the rim flange.
3
-
EN
Jets for brush watering
Shampoo from the jets for brush watering
mixed as detergent with water is sprayed
on the vehicle.
Foam wash
The foam wash sprays the vehicle with
foam before the wash.
Dirt catcher
The dirt catcher retains particles which
could block the jets.
Dosing pumps
The dosing pumps mixes the following de-
tergents and cleaning products with water:
shampoo, foam, (DT 811)
–
drying aid, (DT 829).
–