Adjust The Running Belt; Maintenance - SPORTSTECH F66 Benutzerhandbuch

8.1. Maintain the machine
Proper maintenance can always keep the machine in good condition.
1. Do not use sand paper or solvent to clean the machine.
2. Controlling parts may not be exposed to the sun or humid environment.
3. Check and tighten all parts regularly. Replace broken parts immediately.

8.2. Adjust the running belt

The running belt is well adjusted before being packed. After a period of use, the running belt may loosen
or deflect, which is normal. Then it is necessary to adjust the running belt, otherwise there will be friction
damage to the running belt.
Tension:
a) Keep the machine at the speed of 3km/h.
b) Put the multi-wrench into the left adjusting screw and turn clockwise by 1/4 circle.
c) Put the multi-wrench into the right adjusting screw and turn clockwise by 1/4 circle.
d) If necessary, repeat Step b and c as above until the running belt runs smoothly.
NOTE: These four steps are available to tighten the running belt, if you need to loosen it, please turn counter-clockwise.
(Diagram 1) Tighten running belt

8. MAINTENANCE

(Diagram 2) Losen running belt
15