SPORTSTECH F66 Benutzerhandbuch Seite 39

7.2 Unload operating
1. Insert power plug into the socket with grounded wire, turn the switch to "1" position which is
on the frame
2. Put the safety key in the right position, then circuit is on, press "on/off", keep it runnig in unload
condition. Test the condition of running belt (testing from low speed to high ones),
after testing, press "on/off".
3.
If everything is ok, then start to run.
7.3 Meter operating instruction
1. Insert power plug into the socket with grounded wire, turn the switch to "1" position which is on
the frame. Place the safety key to the appointed position. After a few seconds, panel will show
that the machine is ready.
2. Attach safety key to your clothes/belt, and stand on the footplate on both sides.
3. Press"on/off" key, running belt moves at the lowest speed (1.0km/h). Speed windows will display
your running speed.
4. Start to run.
5.
Press speed key or incline key to adjust speed and incline, speed display and incline display will
show your speed and current incline.
6. To end your exercise in a safe way, please first press "on/off" key to close the treadmill.
Please leave the running belt until it stops slowly. Turn off the power.
Heart Rate Testing
Our treadmill can test your heart rate via the heart rate sensors. The data is only for reference.
14