Guide For Malfunctions - SPORTSTECH F66 Benutzerhandbuch

9. GUIDE FOR MALFUNCTIONS

9.1. Analyzing and eliminating malfunction
Issue No. Malfunction
1 Treadmill can't be started
2 Meter can't display
3 Heart rate can't be
displayed
4 Incline doesn't work
5 Running belt runs faster
or slower than what has
been displayed
6 Running belt slips
7 Running belt is deflected
NOTE: If the machine still doesn't work after taking these solutions, please contact our services as soon as possible.
18
Reasons
The safety key isn't in the
right position
The electrical switch is
placed to "0"
creepage switch is not
OPEN
The meter control line
and control panel are
unconnected
The pole of heart rate
sensor is not wet enough
Disturbed by
electromagnetism
The motor wire is not well
connected
Unadjusted
Running belt is not tight
enough
The running belt is
unadjusted.
Solution
Put the safety key in the right position
Turn the electrical switch to "1"
Replace creepage switch
Pull the bolt out and open the motor
cover and reconnect it. Turn on the
meter and reconnect
Wet the pole with water or liquid for
hard contact lenses
Stay away from electromagnetism
Open the motor cover and reconnect it
Readjust it
Please read point 8.2 Adjustment steps
for tightening running belt for reference
Please read point 8.2 The steps for
adjusting the deflected running belt for
reference