PANCONTROL PAN 188 Bedienungsanleitung Seite 37

Android
1. Call meterview.apk from the included CD.
2. Connect your Android mobile phone to your PC via a USB cable.
3. Copy meterview.apk to the mobile or the SD memory.
4. Start the file and use MeterView.
Using MeterView
For the use of the software please refer to the instructions on the PC
or the mobile app.
1. Open the MeerView-APP.
2. Turn on the PAN 188.
3. Press REL/USB 2 seconds-the USB icon will appear in the display
and the data transfer will start.
4. Start Bluetooth on your mobile phone (or computer) and
connect with "MultiMeter-001".
5. On successful connection, the MeerView-APP starts, receives the
measurement results from the PAN 188 and displays them on
the "MeterView application page".
Data hold
If the reading could not be read during measurement due to difficult
operation the „HOLD"-button could be pressed to freeze the display
reading.
1. Press the „HOLD"-button to freeze the display reading.
2. The display shows the „HOLD"-symbol to indicate the activated HOLD
function.
3. Press the „HOLD"-button again to return to standard operation.
backlight
To turn the backlight on or off, press for 2 seconds the button
After 15 seconds, the backlight switches off automatically.
Auto power off
The meter turns off automatically after 15 minutes
EN 14
H