PANCONTROL PAN 188 Bedienungsanleitung Seite 36

1. Perform the measurement as described above.
2. Press REL to store the measured value as the reference value and the
"REL" indicator appears on the display.
3. For further measurements, the device now displays the current value
minus the reference value.
4. To exit the relative value function, press the REL key again.
Maximum/Minimum value
This function allows the reading of maximum or minimum values with
fluctuating measurement results. It is not available at frequency, duty,
continuity test and diode measurement.
1. Press the max/min button until the desired symbol appears on the
display. (MAX, MIN, MAX-MIN)
2. Perform the measurement. The maximum/minimum value is
displayed.
3. To return to normal mode, press the MAX/MIN button 2 seconds
USB / Bluetooth data transfer
This function allows you to upload measured values to a computer to
view, save or analyze them.
The included software must be installed on the computer. Please read the
software description for more information.
1. Connect the meter to the computer via the USB cable or turn on the
Bluetooth connection.
2. Press the USB button for 2 seconds; The data transfer is started.
3. Perform the measurements. The data is uploaded.
4. Press the USB button for 2 seconds; The data transfer is terminated.
Install software "MeterView"
Apple iOS
1. Open the App Store on your Apple mobile phone.
2. Click the search option.
3. Type "MeterView" in the search bar.
4. (You may be asked for your Apple ID password.)
5. Click on "Install"-"loading" will be displayed.
6. When the installation is complete, the MeterView icon is
displayed and you can use MeterView.
EN 13