Troubleshooting - Cleanmaxx SLX225C Gebrauchsanleitung

5. If necessary, clean the collecting container and dust fi lter with clear, lukewarm
water.
6. Let all parts dry completely before you put them back together.
CAUTION: Never insert the fi lter while it is still damp.
The device is assembled in the reverse order.

Troubleshooting

If the device is not working properly, please check whether you are able to
rectify the problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem
The device only works
slowly or does not start.
Low suction force.
Dust escapes from the
device during cleaning.
The control lamp does not
light up when the device
is connected to the mains
power.
21
Possible cause / solution
• Is the battery fl at? Recharge it.
• Is the collecting container full? Empty it.
• Is the fi lter heavily clogged up? Clean it.
• Is the suction opening blocked? Switch off
the device and remove the blockage.
• It is also possible that some smaller items
will remain stuck to the carpet or are too
big / heavy to be picked up by the device.
Remove these foreign bodies by hand.
• Check whether the collecting container and
fi lter are inserted correctly and adjust the
fi tting if necessary.
• Is the charger plugged correctly into the plug
socket and is the barrel connector in the
connecting socket of the device?
• Is the plug socket defective? Try another plug
socket.
• Check the fuse of your mains connection.
EN