8
Transport and storage
8.1 Transport
Only transport the pilot solenoid valve
G
by suitable means. Do not drop. Handle
carefully.
8.2 Storage
Store the pilot solenoid valve free
G
from dust and moisture in its original
packaging.
Avoid UV rays and direct sunlight.
G
Maximum storage temperature: 50 °C.
G
9
Functional description
The pilot solenoid valves are made of plastic
and are equipped with a electric solenoid.
Switch position a1
Neutral position C.f. 1 Neutral position C.f. 2
A
P
R
Switch position b1
Working position C.f. 1 Working position C.f. 2
A
P
R
When the valve is idle, it is in switch position
a.
normally closed
normally open
When power is applied, the valve switches
to switch position b.
normally closed
normally open
The pilot solenoid valves have an optional
manual override.
0322, 0324, 0326
Switch position a2
A
P
R
Switch position b2
A
P
R
= a1
= a2
= b1
= b2
Optional accessories:
GEMÜ 0322: Mounting plate for
DIN rail mounting
GEMÜ 0326: Battery rails,
blanking plate
AC solenoid
Tendency to hum
10 Construction
Item
Description
1
Solenoid and obturator
2
Plug (option)
3
Manual override (option)
4
Valve body (connections A and P)
5
Connection R
6
Cable entry
11 Installation and operation
Danger from electric shock!
There is a danger of injury or
®
death (if operating voltage
is higher than safe extra low
voltage)!
Before performing any work on
G
the pilot solenoid valve switch
off power and protect circuit
from being switched on again.
21/32
Construction
DANGER