Finish Operation; Maintenance And Care - Kärcher VC 5200 Betriebsanleitung

* depending on model
ComfoGlide nozzle
Figure 10a
Carpets and carpeted floors:
Select the following switch setting:
Figure 10b
Hard surfaces:
Select the following switch setting:
Turbo nozzle
Figure 11
Carpets and wall-to-wall carpeting
low flooring:
Turn off the appliance and disconnect
the mains plug.
Figure 15
Briefly tug at the power cord and let go it;
the cable will automatically roll into the
appliance.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Cleaning the device
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
8
English
Suction using accessories*

Finish operation

Maintenance and Care

Put the lever on the symbol
=
Carpets and wall-to-wall carpeting
high flooring:
Put the lever to the symbol
=
Combi-nozzle
Figure 12
To suck off dust from joints and corners
or from upholstered furniture, curtains,
etc.
Figure 13
If taking a break, use the parking holder
on the backside of the appliance and
connect the floor nozzle.
Figure 14
When vacuuming for example steps, you
can carry the appliance on its handle.
Figure 16
To park/ transport the appliance, use the
stoppers on the lower side of the ma-
chine; hang in the floor nozzle while do-
ing so.
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Clean the dust chamber with a dry wipe
cloth/ dust brush.
Replacing the filter bag
Note: Separate the telescopic suction pipe
from the handle to see the filter change indi-
cator.