Boost Function - eQ-3 MAX! Bedienungsanleitung

The boost function makes use of human sensations of heat.
When the function is activated, the heating valve opens
immediately for 5 minutes at 80% (factory setting).
You can feel the heat from the radiator immediately and
at the end of the 5 minutes, the room continues to heat
up. If you arrive home earlier than usual and want to heat
the room up quickly, or you need some extra heat in the
morning after a shower, then the boost function will help
you with this.
• Press the Boost button to activate the boost function.
The remaining time for the function is counted down in
•
seconds ("300" to "000"). Whilst the function is active,
is displayed.
• The activity symbol (
adjusting pin opens/closes the valve.
Once the set time has elapsed, the radiator thermostat
•
switches back to the mode that was active previously
(automatic/manual), with the temperature that was set
previously.
The function can be deactivated prematurely at any time
•
by pressing the Boost button again.
The radiant heat will not have an immediate
effect if the radiator is covered or concealed (e.g.
by a sofa).
If the duration of the boost function (e.g. via the
MAX! Cube) is set so that the display exceeds 999
seconds, the display value switches from seconds
to minutes.
26

10. Boost function

) is displayed as long as the