Central Remote Controller - Toshiba RBC-CR1-PE Benutzerhandbuch

The Central Remote Controller can control up to 16 individual indoor units. This controller can control
individually or collectively the indoor units connected to the Central Remote Controller. All of the functions of the
air conditioners can be controlled. It is also possible to combine the 7 Day Timer (RBC-WT1-PE) with this

Central Remote Controller.

CENTRAL CONTROL
Separate control and display for the each of the indoor units connected.
CONTROL OF THE INDOOR UNIT FROM ITS REMOTE CONTROLLERS
The air conditioner can be controlled by the Central Remote Controller and by a Standard Remote Controller in
the modes below.
Last push priority: All air conditioner functions can be changed by either Remote Controller.
Central: The air conditioner settings can be modified by the Central Remote Controller.
The air conditioner can only be switched on and off by the Standard Remote Controller.
Central Locked: The air conditioner is locked in the off position.
FILTER SIGN
As a reminder to clean the filters this is displayed on the Standard Remote Controller and Central Remote
Controller.
STANDBY
In case of usage with 2 pipe multi systems cooling can be over ruled by heating. In this case Standby is
displayed.
POWER FAILURE
The Central Remote Controller has a built in battery backup for power failure. This lasts for around 72 hours
after a full charge of 120 hours.
TIMER OPERATION
When connected with the 7 Day Timer (RBC-WT1-PE) the Central Remote Controller can control the scheduled
timer operations.
GB
AI C R
ENTRAL EMOTE
S G
YSTEM UIDELINES
F
UNCTIONS
00
– 4 –
C
ONTROLLER