Operation Restriction - Toshiba RBC-CR1-PE Benutzerhandbuch

1 MONITOR/SET Button
Select the setting mode by pushing this button. SET
will begin to flash on the display.
2 SINGLE SELECT / SELECT ALL Buttons
Select the unit(s) whose settings require
modification by pressing these buttons.
3 SELECT CONTROL Button
Pressing this key can restrict the operation from the
Local Remote Controller.
NO DISPLAY: Last Push Priority.
CENTRAL: Is displayed, the operation of the
Remote Control is restricted to on and off operation.
LOCKED: Is displayed, the selected air conditioner
is locked in the off position.
GB
AI C R
ENTRAL EMOTE
O R
PERATION ESTRICTION
– 11 –
C
ONTROLLER
4 Indoor unit setting is explained in detail on
page 9.
5 To register changes to the operating conditions
of the air conditioners press the MONITOR/SET
Button.
The display changes from SET to MONITOR.