Timer Operation - Toshiba RBC-CR1-PE Benutzerhandbuch

The timer function is available from the separate 7 Day Timer (RBC-WT1-PE) the timer is connected directly to
the Central Remote Controller.
The selected air conditioner can be switched on or off by the timer.
1 MONITOR/SET Button
Select the setting mode by pushing this button. SET
will begin to flash on the display.
2 SINGLE SELECT / SELECT ALL Buttons
Select the unit(s) whose settings require
modification by pressing these buttons.
3 TIMER Button
To select the timer press the timer button this
associates the connected timer with the selected unit.
If TIMER is not displayed it is not associated with
that unit.
GB
AI C R
ENTRAL EMOTE
T O
IMER PERATION
00
– 10 –
C
ONTROLLER
4 Indoor unit setting is explained in detail on
page 9.
5 To register changes to the operating conditions
of the air conditioners press the MONITOR/SET
Button.
The display changes from SET to MONITOR.