Operation Section; Start/Stop Button - Toshiba RBC-AX31UW-E Betriebsanleitung

Wireless Remote Controller Kit

Operation section

Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be
used by pushing ON/OFF
1
Operation select button
Selects the desired operation mode.
2
Fan mode select button
Selects a fan mode.
3
Time setup button
Used for timer setting. (See page 8)
4
Check button
The CHECK button is used for the check
operation. During normal operation, do not
use this button.
5
Temperature set button
Adjusts the room temperature.
Set the desired set temperature by pushing
or .
only.
1
2
3
4
ACL
5
6
ADR
7
SENSOR
6

Start/Stop button

When the button is pushed, the operation
starts, and it stops by pushing the button
again.
When the operation has stopped, the
operation lamp and all the displays disappear.
7
Filter button
Resets (Erases) "FILTER
OPTION :
Remote controller sensor
Usually the temperature sensor of the indoor
unit senses the temperature.
The temperature on the surrounding of the
remote controller can also be sensed.
For details, contact the dealer from which
you have purchased the air conditioner.
– 6 –
Owner's Manual
EN
" display.
6-EN