Changing The Batteries - Silvercrest Z30412 Bedienungsanleitung Und Sicherheitshinweise

by a bar to the next higher kWh value.
The following table shows the
bar value increments used by
the device:
1 bar = 1 kWh
1 bar = 2 kWh
1 bar = 5 kWh
1 bar = 10 kWh
1 bar = 15 kWh
©
Note: All the stored values are erased
automatically as soon as you remove the
batteries from the device.
Note: To do this you will require a
crosshead screwdriver.
42 GB/IE
66149_silv_Energiekosten-Messgerät_Content_GB-FI-SE-DE.indd 42 25.05.11 15:06

Changing the batteries

(6 bars = 6 kWh)
(factory default
setting)
(6 bars = 12 kWh)
(6 bars = 30 kWh)
(6 bars = 60 kWh)
(6 bars = 90 kWh)