Preparation For Use - Silvercrest Z30412 Bedienungsanleitung Und Sicherheitshinweise

The energy cost meter is now ready for use.
©
Note: Ensure that the energy cost meter
and the consumer device are switched
on, so that measurements can be taken.
Note: The LC display
after approx. 3 minutes automatically if
the energy cost meter is inserted into a
mains outlet socket but no button has
been pressed. The data is retained. You
can reactivate the LC display
pressing the FUNCTION
SELECT
Note: The LC display
after approx. 1 minute automatically if
the energy cost meter is removed from the
mains outlet socket. The data is retained.
20 GB/IE
66149_silv_Energiekosten-Messgerät_Content_GB-FI-SE-DE.indd 20 25.05.11 15:06

Preparation for use

(Fig. A+B)
6 button.
1 switches off
1 by
2 , SET 3 or
1 switches off