Silvercrest Z30412 Bedienungsanleitung Und Sicherheitshinweise Seite 35

66149_silv_Energiekosten-Messgerät_Content_GB-FI-SE-DE.indd 37 25.05.11 15:06
(WATT) overload warning.
6. Press the SET button
your settings. The first digit flashes.
7. Press the SELECT button
edly until the desired value appears.
8. Repeat steps 6 and 7 to program the
remaining values.
9. Press the SET button
your settings.
10. Press and hold down the FUNCTION
button 2
save the entered values.
As soon as an overload warning value
is exceeded, the OVERLOAD WARN-
ING display flashes in the LC display
and the meter emits an audible alarm sig-
nal.
Note: If the overload warning value is set
to AMP, then the LC display
3 to confirm
3 to confirm
for approx. 3 seconds to
1
6 repeat-
1
shows the
GB/IE 37