Silvercrest Z30412 Bedienungsanleitung Und Sicherheitshinweise Seite 34

Note: The overload warning values are
set to 0.00 in the factory.
1. Press the FUNCTION button
2. Press and hold down the FUNCTION
3. Press the FUNCTION button
4. Press the SET button
5. Press the SELECT button
36 GB/IE
66149_silv_Energiekosten-Messgerät_Content_GB-FI-SE-DE.indd 36 25.05.11 15:06
peatedly until the basic mode (voltage
display) appears in the LC display
button 2 for about 3 seconds.
briefly. The MAX LOAD (maximum
load) display appears in the LC
display 1 .
Note: Press the FUNCTION button
2 briefly twice if you have already
programmed the electricity prices for
tariff 1 and tariff 2.
or WATT display flashes.
either the current (AMP) overload
warning or the power consumption
2 re-
1
2
3 . The AMP
6 to select
.