Sparking Plug; Maintenance - Texas TG500A Bedienungsanleitung

9. Sparking plug

Remove the sparking plug cover.
-
Brush off dirt from the sparking plug.
-
Use a sparking-plug wrench to loosen the sparking plug.
-
Inspect if the isolation is intact.
-
Clean the sparking plug with a steel brush.
-
Measure the electrode distance, make sure not to damage the electrode.
-
The distance should be: 0,7 – 0,8 mm
-
If the sparking plug is okay, put it back in its place.
-
Put the sparking plug cover back in its place.
-

10. Maintenance

The purpose of maintenance is to keep the engine in its best possible shape.
-
Repairs should always be carried through by an authorized Power Line dealer.
-
Interval
Part
Inspect bolts and nuts
Inspect and fill with oil
Change oil
Clean / replace oil filter
Inspect for oil leakage
Inspect air filter
Clean air filter
Clean fuel filter
Inspect sparking plug
Inspect fuel pump
Adjust valves
Inspect valves
* Maintenance of air filter in accordance with the user manual to the machine where
the engine is mounted.
PROCEDURE
NOTE
For every
Every time 20 running
hrs
X
X
X
X (clean)
X
X
For every
50 running
hrs
X (clean)
X*
15
For every For every
100 200 running
running hrs hrs
X
X
X
X
X
X