Before Startup; Operation - Kärcher BR 40/25 C Ep Betriebsanleitung

Before Startup

Unloading
 Release the star grips of the pushing
handle fastening.
 Turn the pushing handle backwards
and tighten the star grips.
 Place long lateral boards of the packag-
ing as a ramp next to the pallet.
 Fix the ramp on the pallet with nails.
 Place short boards as a support under-
neath the ramp.
 Remove the wooden bars in front of the
wheels.
 Push down the appliance through the
ramp from the pallet.
Installing the Brushes
The brushes must be installed before the
initial operation (see "Maintenance works").
Installing the Vacuum Bar
 Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above
the suspension. Tighten the wing nuts.
 Insert the suction hose.
Warning!
Risk of damage. Raise the vacuum bar be-
fore reversing.
Note
To put the brush drive out of operation im-
mediately release the control handle.
Filling in Detergents
Warning
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety and
danger of accident. Only use detergents
that are free from solvents, hydrochloric
acid and hydrofluoric acid.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Recommended detergents:
Application
Routine cleaning of all wa-
ter resistant floors
Routine cleaning of glossy
surfaces (e.g. granite)
Routine cleaning and basic
cleaning of industrial floors
Routine cleaning and basic
cleaning of fine stoneware
tiles
Routine cleaning of tiles in
sanitary areas
Cleaning and desinfection
in sanitary areas
Removal of coating from all
alkali-resistant floors (e.g.
PVC)
Removal of coating from li-
noleum floors
 Open the cover of the fresh water reser-
voir.
– 4
EN

Operation

Detergent
RM 745 RM
746
RM 755 es
RM 69
RM 753
RM 751
RM 732
RM 752
RM 754
17