Virutex PEB250 Gebrauchsanweisung Seite 20

PEB200/PEB250 HOT MELT MANUAL EDGEBANDER
Read these OPERATING INSTRUCTIONS and the attached GENERAL SAFETY INSTRUCTIONS LEAFLET
carefully before using the machine. Make sure you have understood them before operating the machine.
Keep both sets of instructions for future reference.
1. SAFETY GUIDELINES FOR THIS MACHINE
Not following the safety guidelines may result in serious personal injury.
• Do not touch any moving parts.
• Take care as the machine can get very hot.
• Do not touch hot components.
• Hold the machine with both hands during use.
• Do not lean over the machine when it is hot.
• Make sure there is always enough cable, and do not obstruct the cable when operating the machine.
• Unplug from the mains before making any adjustments, changing accessories or storing the electric tools.
• Check the power cable before starting the machine.
• Do not repair the machine or carry out maintenance work when it is hot.
• Never use the machine close to inflammable or explosive materials.
• Do not work in damp places or in the rain.
• The machine gives off steam.
• Always work in well-ventilated places. Use a face mask if the glue manufacturer so indicates.
• It is essential to read and comply with all the safety measures stated by the manufacturer of the glue that you are
going to use.
20 - PEB200-PEB250 / Operating instructions
ENGLISH