Completion Of Model Vehicle; A) Taking Off The Car Body; B) Testing Of Steering Function With The Help Of Transmitter - Reely ROAD MISSION Bedienungsanleitung



8. Completion of Model Vehicle

a) Taking off the car body

The car body is secured with two holding brackets (1 and 2)
which have to be slid out of the retaining pins from the side.
Afterwards the body (3) can be lifted off towards the top.

b) Testing of steering function with the help of transmitter

If the front wheels are turning left although you steered towards the right on the transmitter, you have to change the
direction of steering of the steering servo with the servo reverse function on the remote control transmitter.
If the steering on the vehicle already responds strongly to a slight steering on the transmitter, choose a steering point
for the steering rods that is further on the inside on the lever of the steering servo.
Our tip:
Always try to set the mechanics optimally first before you limit the servo path electronically with trans-
mitter functions such as end point adjustment (EPA) or dual rate (D/R).
Figure 1
29