Ce Declaration Of Conformity - Telcoma T 200 Installationsanweisungen

GB
To frequently control that no visible damage has occurred to the automation, and to inform the
installer immediately if damage is noticed.
Not to allow children to play in the vicinity of the automation.
- Prepare a maintenance schedule for the automation installation (at least once every 6 months for the
safety devices), recording the work carried out in a special book.
In line with its continual product improvement policy, both in aesthetic and functional terms,
TELCOMA Srl reserves the right to make changes at any time without notice.
DISPOSAL
This product is made of various components which may contain polluting substances. Do not pollute the envi-
ronment!
Inquire about recycling or disposal procedures and dispose of product in compliance with regulations locally in
force.

CE DECLARATION OF CONFORMITY

The undersigned Augusto Silvio Brunello, Legal representative of the firm:
TELCOMA S.r.l. Via L. Manzoni 11, 31015 Conegliano (TV) ITALY
Declares that the product:
Type: Control unit
Is in conformity with the essential requirements of section 3 and relative provisions of the Directive 1999/5/CE, if used for
the purposes for which it has been designed.
Is in conformity with the safety and health requirements, section 3.1.a
Applicable standards: EN 60950
Is in conformity with the protection requirements related to electromagnetic compatibility, section 3.1.b
Applicable standards: EN 301 489-3
Is in conformity with radio frequency input efficiency within the spectrum, section 3.2
Applicable standards: ETSI EN 300 220-3
Place and date:
64
In accordance with Directive 1999/5/CE (R&TTE)
Model: T200
Conegliano, 01/06/2006
Use:Gate operator control unit
Legal representative
Augusto Silvio Brunello